LC863864B Datasheet, PDF (14/20 Pages) Sanyo Semicon Device – 8-bit 1-chip Microcontroller

LC863864B/56B/48B/40B/32B/28B/24B/20B/16B
Current Dissipation Characteristics / Ta = -10°C to +70°C, VSS = 0V
The sample current dissipation characteristics is the measurement result of SANYO provided evaluation board when
the recommended circuit parameters shown in the sample oscillation circuit characteristics are used externally. The
currents through the output transistors and the pull-up MOS transistors are ignored.
Parameter
Symbol
Current dissipation
during basic
operation
(Note 5)
IDDOP(1)
Pins
VDD
Conditions
• FmX’tal=32.768kHz
X’tal oscillation
• System clock : VCO
• VCO for OSD operating
• Internal RC oscillation stops
VDD [V]
min
4.5 to 5.5
Limits
typ
max
unit
10
24 mA
IDDOP(2)
• FmX’tal=32.768kHz
X’tal oscillation
• System clock : X'tal
(Instruction cycle time: 366.2µs)
• VCO for system, VCO for OSD,
Internal RC oscillation stop
• Data slicer, AD converters stop
4.5 to 5.5
55
300 µA
Current dissipation
in HALT mode
(Note 5)
IDDHALT(1)
• HALT mode
• FmX’tal=32.768kHz
X’tal oscillation
• System clock : VCO
• VCO for OSD stops
• Internal RC oscillation stops
4.5 to 5.5
3
9 mA
IDDHALT(2)
• HALT mode
• FmX’tal=32.768kHz
X’tal oscillation
• VCO for system stops
• VCO for OSD stops
• System clock : Internal RC
4.5 to 5.5
300
1000
IDDHALT(3)
• HALT mode
• FmX’tal=32.768kHz
X’tal oscillation
• VCO for system stops
• VCO for OSD stops
• System clock : X’tal
(Instruction cycle time: 366.2µs)
4.5 to 5.5
µA
45
200
Current dissipation IDDHOLD
• HOLD mode
in HOLD mode
• All oscillation stops.
4.5 to 5.5
0.05
20
(Note 5)
(Note 5) The currents through the output transistors and the pull-up MOS transistors are ignored.
No.A0119-14/20