LC863864B Datasheet, PDF (1/20 Pages) Sanyo Semicon Device – 8-bit 1-chip Microcontroller

Ordering number : ENA0119A
LC863864B, LC863856B
LC863848B, LC863840B
LC863832B, LC863828B
LC863824B, LC863820B
LC863816B
CMOS IC
64K/56K/48K/40K/32K/28K/24K/20K/16K-byte ROM,
CGROM16K-byte
on-chip 768-byte RAM and 352×9-bit OSD RAM
8-bit 1-chip Microcontroller
Overview
The LC863864B/56B/48B/40B/32B/28B/24B/20B/16B are 8-bit single chip microcontrollers with the following on-chip
functional blocks :
• CPU : Operable at a minimum bus cycle time of 0.424µs
• On-chip ROM capacity
Program ROM : 64K/56K/48K/40K/32K/28K/24K/20K/16K-bytes
CGROM
: 16K-bytes
• On-chip RAM capacity : 768-bytes
• OSD RAM : 352 × 9-bits
• Closed-Caption TV controller and the on-screen display controller
• Closed-Caption data slicer
• Four channels × 8-bit AD Converter
• Three channels × 7-bit PWM
• Two 16-bit timer/counter, 14-bit base timer
• 8-bit synchronous serial interface circuit
• IIC-bus compliant serial interface circuit (Multi-master type)
Continued on next page.
Note : This product includes the IIC bus interface circuit. If you intend to use the IIC bus interface, please notify us of this in
advance of our receiving your program ROM code order.
Purchase of SANYO IIC components conveys a license under the Philips IIC Patents Rights to use these components in
an IIC system, provided that the system conforms to the IIC Standard Specification as defined by Philips.
Trademarks
IIC is a trademark of Philips Corporation.
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before usingany SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
Ver.1.00
83006 / 52506HKIM No.A0119-1/20