LV4124W Datasheet, PDF (13/21 Pages) Sanyo Semicon Device – Single-chip LCD panel driver IC(Supports the ALP202 LCD panel)

Continued from preceding page.
Pin No.
Pin
Pin voltage
51
BYIN
–
52
RYIN
LV4124W
I/O
Input handling
Pin function
These pins are used for he
color difference signal inputs
in Y/color difference input
mode. The clamp level in this
mpde is 2.8 V.
In other modes, the signal
I
from pin 53 is input to these
pins. In hose modes the pin
voltage will be about 1.6 V.
The standard input signal
level is 0.3 V p-p for a 75%
color bar signal.
Units (Capacitors: F, Resistors: Ω)
Equivalent circuit
53
COUT
1.6 V
O
Provides the ACC output.
(This pin is left open in Y/color
difference input mode.)
54
BLKLIM
–
I
Sets the RGB output
amplitude (black to black)
clipping level
55
APC
2.7 V
O
APC filter connection.
(This pin is left open in Y/color
difference input mode.)
56
VXOOUT
2.9 V
O
VXO output
(This pin is left open in Y/color
difference input mode.)
Continued on next page.
No.6000-13/21