LC863448B Datasheet, PDF (12/17 Pages) Sanyo Semicon Device – 8-bit 1-chip Microcontroller

LC863448B/40B/32B/28B/24B/20B/16B
Analog Mode RGB Characteristics / Ta = -10°C to +70°C, VSS = 0V
Parameter
Analog output
voltage
Time setting
Symbol
Pins
R. G. B
Analog output mode
R. G. B
Conditions
Low level output
Intensity output
Hi level output
70% 10pf load
VDD [V]
5.0
min
0.45
0.90
1.35
Limits
typ
max
unit
0.5
0.55
1.0
1.10
V
1.5
1.65
50 ns
Sample Current Dissipation Characteristics / Ta = -10°C to +70°C, VSS = 0V
The sample current dissipation characteristics are the measurement result of SANYO provided evaluation board
when the recommended circuit parameters shown in the sample oscillation circuit characteristics are used externally.
The currents through the output transistors and the pull-up MOS transistors are ignored.
Parameter
Symbol
Pins
Conditions
VDD [V]
min
Current dissipation
during basic
IDDOP(1)
VDD
• FmX’tal = 32.768kHz
X’tal oscillation
operation
(Note 3)
• System clock : VCO
• VCO for OSD operating
4.5 to 5.5
• OSD is Digital mode
• Internal RC oscillation stops
IDDOP(2)
VDD
• FmX’tal = 32.768kHz
X’tal oscillation
• System clock : VCO
• VCO for OSD operating
4.5 to 5.5
• OSD is Analog mode
• Internal RC oscillation stops
IDDOP(3)
VDD
• FmX’tal = 32.768kHz
X’tal oscillation
• System clock : X’tal
(Instruction cycle time : 366.2µs)
4.5 to 5.5
• VCO for system VCO for OSD,
internal RC oscillation stop
• Data slicer, AD converters stop
Current dissipation
in HALT mode
IDDHALT(1)
VDD
• HALT mode
• FmX’tal = 32.768kHz
(Note 3)
X’tal oscillation
• System clock : VCO
4.5 to 5.5
• VCO for OSD stops
• Internal RC oscillation stops
Limits
typ
max
unit
14
28
mA
22
40
50
300 µA
4
10 mA
IDDHALT(2)
VDD
• HALT mode
• FmX’tal = 32.768kHz
X’tal oscillation
4.5 to 5.5
300
• VCO for system stops
• VCO for OSD stops
• System clock : Internal RC
IDDHALT(3)
VDD
• HALT mode
• FmX’tal = 32.768kHz
X’tal oscillation
• VCO for system stops
4.5 to 5.5
35
• VCO for OSD stops
• System clock : X’tal
(Instruction cycle time : 366.2µs)
Current dissipation IDDHOLD
VDD
• HOLD mode
in HOLD mode
• All oscillation stops.
4.5 to 5.5
0.05
(Note 3)
Note 3 : The currents through the output transistors and the pull-up MOS transistors are ignored.
1000
µA
200
20 µA
No.7935-12/17