TIG058E8 Datasheet, PDF (1/5 Pages) Sanyo Semicon Device – Light-Controlling Flash Applications

Ordering number : ENA1381
TIG058E8
SANYO Semiconductors
DATA SHEET
TIG058E8
N-Channel IGBT
Light-Controlling Flash Applications
Features
• _{Low-saturation voltage.}
• _{Low voltage drive (4V).}
• _{Enhansment type.}
• _{Built-in Gate-to-Emitter protection diode.}
• _{Mounting Height 0.9mm, Mounting Area 8.12mm}²_.
• _{dv / dt guarantee*.}
• _{Halogen free compliance.}
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Collector-to-Emitter Voltage
Gate-to-Emitter Voltage (DC)
Gate-to-Emitter Voltage (Pulse)
Collector Current (Pulse)
Maximum Collector-to-Emitter dv / dt
Channel Temperature
Storage Temperature
Symbol
VCES
VGES
VGES
ICP
dVCE / dt
Tch
Tstg
Electrical Characteristics at Ta=25°C
Conditions
PW≤1ms
CM=150μF, VGE=4V
VCE≤320V, starting Tch=25°C
Ratings
400
±6
±8
150
400
150
-40 to +150
Unit
V
V
V
A
V / μs
°C
°C
Parameter
Symbol
Conditions
Ratings
Unit
min
typ
max
Collector-to-Emitter Breakdown Voltage V(BR)CES IC=2mA, VGE=0V
400
V
Collector-to-Emitter Cutoff Current
ICES
VCE=320V, VGE=0V
10
μA
Gate-to-Emitter Leakage Current
IGES
VGE=±6V, VCE=0V
±10
μA
Marking : ZB
Continued on next page.
* : Concerning dv / dt (slope of Collector Voltage at the time of Turn-OFF), dv / dt > 400V / μs will be 100% screen-detected in the circuit shown as Fig. 1.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not
be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal
system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten
human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they
grant any guarantee thereof. If you should intend to use our products for applications outside the standard
applications of our customer who is considering such use and/or outside the scope of our intended standard
applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the
intended use, our customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are
not guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an
independent device, the customer should always evaluate and test devices mounted in the customer's
products or equipment.
www.semiconductor-sanyo.com/network
D1008PJ MS IM TC-00001783 No. A1381-1/5