LV25200M Datasheet, PDF (1/45 Pages) Sanyo Semicon Device – Bi-CMOS IC Single chip Tuner IC for Car Radio

Ordering number : ENA0976
LV25200M
Bi-CMOS IC
Single chip Tuner IC for Car Radio
Overview
LV25200M is a tuner IC for car radio, which incorporates the AM/FM Tuner, PLL, AM/FM Noise Canceller (NC), FM
Stereodecoder (MPX) , Multipath-noise Rejection Circuit (MRC) .
This IC enables development of the low-cost analog tuner for OEM.
Functions
• AM+FM-FE+IF+NC+MPX+MRC+PLL
Features
• World-wide compatible tuners
A single tuner module is enough to supply the world-wide compatible tuners.
FM is compatible with US EURO, Japan bands while AM is compatible with LW, MW, SW, Weather-Band.
With the image cancel mixer incorporated in FM MIX, the external RF AMP can be deleted.
Compatible with RDS. PLL fast locking.
• Self-contained type IF band variable filter incorporated
Detects any neighboring interfering station and varies the IF filter band, enabling superior selectivity characteristic.
• Auto alignment EEPROM necessary
FM RF, VCO, Null-voltage, Mute-on, Mute-ATT, SNC, HCC, Station detector, Gain AGC sensitivity,
CCB bus compatible
• Reduced parts quantity
Parts quantity reduced from our conventional products
• Other functions
AM noise canceller (genuine compatible)
• CCB is a registered trademark of SANYO Electric Co., Ltd.
• CCB is SANYO Semiconductor's original bus format. All bus addresses are managed by SANYO
Semiconductor for this format.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
D2607 TI IM 20071004-S00024 No.A0976-1/45