LV0229XA Datasheet, PDF (1/8 Pages) Sanyo Semicon Device – Front Monitor OE-IC

Ordering number : ENA2144
LV0229XA
Monolithic Linear IC
For Optical Pickups
Front Monitor OE-IC
Overview
The LV0229XA is a front monitor optoelectronic IC for optical pickups that has a built-in photo diode compatible with
three waveforms. LV0229XA is small size and type CSP packages.
Functions
• Pin photodiode compatible with three wavelengths incorporated.
• Gain adjustment (-5dB to +5dB in 256 steps) through serial communication.
• Amplifier to amplify differential output.
Features
• Photodiode compatible with three wavelengths incorporated, high-speed process employed.
• Compact, thin CSP package employed.
• Use AR coated glass for three-wavelength (One side).
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VCC
Pd
Topr
Tstg
Conditions
substrate *1, Ta = 75°C
*1: Glass epoxy both-side substrate 55mm × 45mm × 1mm, Copper foil area (head: about 85% tail: about 70%)
Ratings
Unit
6
V
105
mW
-20 to +75
°C
-40 to +100
°C
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system,
safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives
in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any
guarantee thereof. If you should intend to use our products for new introduction or other application different
from current conditions on the usage of automotive device, communication device, office equipment, industrial
equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the
intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely
responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
O3112NKPC 20121009-S00002 No.A2144-1/8