LC89051V Datasheet, PDF (1/15 Pages) Sanyo Semicon Device – Digital Audio Interface Receiver

Ordering number : EN*5543
CMOS LSI
LC89051V
Digital Audio Interface Receiver
Preliminary
Overview
The LC89051V is for use in IEC958 format data
transmission between digital audio equipment. This LSI is
used on the receiving side, and handles synchronization
with the input signal and demodulation of that signal to a
normal format signal.
Features
• On-chip PLL circuit synchronizes with the transmitted
IEC958 format signal.
• Low-voltage operation (3.3 V)
• Provides 128fs, bit, and L/R clock outputs.
• System clock can be selected to be either 384fs or 512fs.
• Microcontroller interface code settings for different
output types
— Input pin, emphasis output, input bi-phase data
output, and validity flag output settings
— Audio data output format setting
— Channel status output (32-bit output for consumer
products)
— Subcode Q output with CRC flags (80 bits)
— Start ID and shortening (skip) ID detection for DAT
with subcodes
• The built-in VCO can receive at speeds up to twice fs
only when operating from a 5-V power supply.
• Miniature package: SSOP-24
Package Dimensions
unit: mm
3175A-SSOP24
[LC89051V]
SANYO: SSOP24
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
N3097HA (OT) No. 5543-1/15