LC87F6D64A Datasheet, PDF (1/19 Pages) Sanyo Semicon Device – FROM 64K byte, RAM 2048 byte on-chip 8-bit 1-chip Microcontroller

Ordering number : ENA1007
LC87F6D64A
CMOS IC
FROM 64K byte, RAM 2048 byte on-chip
8-bit 1-chip Microcontroller
Overview
The SANYO LC87F6D64A is 8-bit microcomputer with the following on-chip functional blocks:
• CPU: operable at a minimum bus cycle time of 100ns
• 64K-byte flash ROM (re-writeable on board/On-chip debugger)
• On-chip RAM: 2048 byte
• VFD automatic display controller/driver
• 16-bit timer/counter (can be divided into two 8-bit timers)
• two 8-bit timer with prescaler
• timer for use as date/time clock
• Day-Minute-Second Counter (DMSC)
• System clock divider function
• Synchronous serial I/O port (with automatic block transmit /receive function)
• Asynchronous/synchronous serial I/O port
• Remote control receive function
• 8-channel×8-bit AD converter
• 14-source 10-vectored interrupt system
All of the above functions are fabricated on a single chip.
Features
„Flash ROM
• Single 5V power supply, writeable on-board.
• Block erase in 128 byte units
• 65536 × 8 bits
„RAM
• 2048 × 9 bits
* This product is licensed from Silicon Storage Technology, Inc. (USA), and manufactured and sold by
SANYO Semiconductor Co., Ltd.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
Ver.1.21
30508HKIM 20071127-S00004 No.A1007-1/19