LC87F2708A_09 Datasheet, PDF (1/21 Pages) Sanyo Semicon Device – FROM 8K byte, RAM 512 byte on-chip 8-bit 1-chip Microcontroller

Ordering number : ENA1335A
LC87F2708A
CMOS IC
FROM 8K byte, RAM 512 byte on-chip
8-bit 1-chip Microcontroller
Overview
The LC87F2708A is an 8-bit microcotroller that, centered around a CPU running at a minimum bus cycle time of 100ns,
integrates on a single chip a number of hardware features such as 8K-byte flash ROM (onboard programmable), 512-byte
RAM, an on-chip debugger, a sophisticated 16-bit timer/counter (may be divided into 8-bit timers), a 16-bit
timer/counter (may be divided into 8-bit timers or PWMs), a synchronous SIO interface, a high-speed 12-bit PWM, two
high-speed pulse width/period counters, a 7-channel AD converter with 12-/8-bit resolution selector, an analog
comparator, a watchdog timer, an internal reset circuit, a system clock frequency divider, and a 16-source 10-vector
interrupt feature.
Features
„Flash ROM
• Capable of on-board programming of voltage source (3.0 to 5.5V)
• Block-erasable in 128 byte units
• 8192 × 8 bits
„RAM
• 512 × 9 bits
* This product is licensed from Silicon Storage Technology, Inc. (USA), and manufactured and sold by
SANYO Semiconductor Co., Ltd.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
Ver.1.01
91609HKIM 20090831-S00003 No.A1335-1/21