LC875J64C Datasheet, PDF (1/23 Pages) Sanyo Semicon Device – ROM 64K/56K/48K byte, RAM 2048 byte on-chip 8-bit 1-chip Microcontroller

Ordering number : EN8302A
LC875J64C
LC875J56C
LC875J48C
CMOS IC
ROM 64K/56K/48K byte, RAM 2048 byte on-chip
8-bit 1-chip Microcontroller
Overview
The SANYO LC875J64C/56C/48C are 8-bit microcomputer that, centered around a CPU running at a minimum bus
cycle time of 83.3ns, integrates on a single chip a number of hardware features such as 64K/56K/48K byte ROM, 2048
byte RAM, sophisticated 16-bit timers/counters (may be divided into 8-bit timers), a 16-bit timer/counter (may be
divided into 8-bit timers/counters or 8-bit PWMs), four 8-bit timers with a prescaler, a 16-bit timer with a prescaler (may
be divided into 8-bit timers), a base timer serving as a time-of-day clock, a high-speed clock counter, a synchronous SIO
interface (with automatic block transmission/reception capabilities), an asynchronous/synchronous SIO interface, a
UART interface (full duplex), an 8-bit 11-channel AD converter, two 12-bit PWM channels, a system clock frequency
divider, ROM correction function, and a 26-source 10-vector interrupt feature.
Features
„ROM
• 65536 × 8-bits
• 57344 × 8-bits
• 49152 × 8-bits
(LC875J64C)
(LC875J56C)
(LC875J48C)
„RAM
• 2048 × 9-bits
(LC875J64C/56C/48C)
„Minimum Bus Cycle
• 83.3ns (12MHz)
• 125ns (8MHz)
• 500ns (2MHz)
VDD=3.0 to 5.5V
VDD=2.5 to 5.5V
VDD=2.2 to 5.5V
Note : The bus cycle time here refers to the ROM read speed.
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
Ver.1.03
20707HKIM 20060222-S00014 No.8302-1/23