SECG1WA0EY-S Datasheet, PDF (9/12 Pages) Sanken electric – 3.0*1.4 Flat View LED

LED Data Sheet - SECG1WA0EY-S
● Reliability test
Test Items
EIAJ ED-4701
Test Conditions
Life _{Steady state operating life}
Tests
High temperature storage
Low temperature storage
Environ
-mental Moisture Resistance
Tests
Temperature cycle
Soldering heat
Solderaibirity
Drop
-
Ta=RT、Ifmax
t=1000h
201
Ta=Tstgmax
t=1000h
202
Ta=Tstgmin
t=1000h
103
Ta=60±5℃、RH=90±5％
t=1000h
105
Tstgmin(30min)～Tstgmax(30min)
100cycles
301
T=260±5℃、t=10s、1time
402
T=245±5℃、t=5±1s、1time、Using flux for Pb free solder
-
H=1m、Drop on maple board、10times
Mesurement Item and Criterion Judge Failure
No Measurement Item
1 Forward Voltage
2 Reverse Current
3 Luminous Intensity
Mark
VF
IR
Iv
Criterion Judge Failure
OK≦V.F.S.×±20％
OK≦U.S.L..×2.0
OK≧I.V.S.×0.5
*Solderability　…　The Lead shall be covered by solder at least 95%.
Mesurement conditions is based on specifications.
Tstgmax and Tstgmin is absolute maximum ratings.
IFmax and IFPmax is absolute maximum ratings.
U.S.L. is upper limit of standard.
V.F.S. is Initial data of VF.
I.V.S. is Initial data of Luminous Intensity.
　　　　SANKEN ELECTRIC COMPANY, LTD.
Page 9 / 12