SECG1WA0EY-S Datasheet, PDF (8/12 Pages) Sanken electric – 3.0*1.4 Flat View LED

LED Data Sheet - SECG1WA0EY-S
● For static electricity
The products are sensitive to the static electricity and care shall be fully taken when handling the products.
Particularly in case that an over-voltage which exceeds the Absolute Maximum Rating of the products shall
be applied, the overflowed energy may cause damages to, or possibly result in destruction of the products.
Buyer shall take absolutely secured countermeasures against static electricity and surge when handling the
products.
・The circuit of anti-static and anti-surge
The anti-static and anti-surge reference circuits are shown below. Since the circuit below is a reference,
a buyer should make a sufficient check on static and surge level when employing products.
Exp : Circuit is a
Static
POWER SUPPLY
BY-PASS
CAPACITOR
0.1μF
RESISTOR
POWER SUPPLY
RESISTOR
R
10kΩ
C
OVER
0.01μF
PROTECTIVE CIRCUIT
REF.CIRCUIT WITH CAPACITOR
LED
(1chip～
5chips Series)
ZD1
VR 7～8V
(Per chip)
ZD2
VR 7～8V
(Per chip)
LED
(1chip～
5chips Series)
PROTECTIVE CIRCUIT
REF.CIRCUIT WITH ZENER DIODE
　　　　SANKEN ELECTRIC COMPANY, LTD.
Page 8 / 12