SAPM01N Datasheet, PDF (6/10 Pages) Sanken electric – silicon power MOSFET

SAPM01N
3. External adjustment of the idling current.
In order to make an external adjustment of the idling current, pin 4(of the SAPM01P) should be left “OPEN” and a
variable resistor(VR) is inserted between pin 5(of the SAPM01P) and pin 2(of the SAPM01N).
With the 200 to 700 ohms of the VR the idling current is to set at 100mA. Note, however, that the idling current is
subject to the variation of the IF(=3mA). Be sure to confirm the exact value at an actual application.
Nch
①
＋ VDD
③
VR
⑤
②
④⑤
④
①②
Pch
③
－ VDD
030416
SSE-22334
6／9
61432