LSS Datasheet, PDF (2/8 Pages) Samtec, Inc – 0,635mm (.025”) Razor Beam™ High Speed Hermaphroditic Terminal/Socket Strip

Product Specification
Series: LSS 0,635mm (.025”) Razor Beam™ High Speed Hermaphroditic Terminal/Socket Strip
1.0 SCOPE
1.1 This specification covers performance, testing and quality requirements for Samtec LSS Series 0,635 mm (.025”)
Razor Beam™ High Speed Hermaphroditic Terminal/Socket Strip connectors. All information contained in this
specification is for two LSS Series connectors in a 6 mm mated height vertical configuration unless otherwise noted.
2.0 DETAILED INFORMATION
2.1 Product prints, footprints, catalog pages, test reports and other specific, detailed information can be found at
www.samtec.com?LSS.
3.0 TESTING
3.1 Current Rating: 1.7 A (6 Adjacent Pins Powered)
3.2 Voltage Rating: 300 VAC
3.3 Operating Temperature Range: -55°C to +125°C
3.4 Electrical:
ITEM
Withstanding Voltage
Insulation Resistance
Contact Resistance (LLCR)
TEST CONDITION
EIA-364-20 (No Flashover,
Sparkover, or Breakdown)
EIA-364-21 (1000 MΩ
minimum)
EIA-364-23
900 VAC
REQUIREMENT
5,000 MΩ
Δ 15 mΩ maximum (Samtec defined)/
No damage
3.5 Mechanical:
ITEM
Durability
Random Vibration
Mechanical Shock
Normal Force
TEST CONDITION
EIA-364-09C
EIA-364-28 Condition V, Letter B
7.56 G 'RMS', 50 to 2000 Hz, 2
hours per axis, 3 axis total , PSD
0.04
EIA-364-27 100 G, 6
milliseconds, sawtooth wave,
11.3 fps, 3 shocks/direction, 3
axis (18 total shocks)
EIA-364-04
REQUIREMENT
100 cycles
Visual Inspection: No Damage
LLCR: Δ 15 mΩ maximum
Event Detection: No interruption >
50 Nanoseconds
Visual Inspection: No Damage
LLCR: Δ 15 mΩ maximum
Event Detection: No interruption >
50 Nanoseconds
30 grams minimum for gold
interface
STATUS
Pass
Pass
Pass
Pass
Revision: C
Date: August 27, 2015
Page 2
© Samtec, Inc.