S3F443FX Datasheet, PDF (51/225 Pages) Samsung semiconductor – 16/32-Bit RISC Microcontroller

ARM INSTRUCTION SET
S3F443FX (Preliminary Spec)
CPSR FLAGS
Setting the CPSR flags is optional, and is controlled by the S bit in the instruction. The N (Negative) and Z (Zero)
flags are set correctly on the result (N is made equal to bit 31 of the result, and Z is set if and only if the result is
zero). The C (Carry) flag is set to a meaningless value and the V (oVerflow) flag is unaffected.
INSTRUCTION CYCLE TIMES
MUL takes 1S + mI and MLA 1S + (m+1)I cycles to execute, where S and I are defined as sequential (S-cycle)
and internal (I-cycle), respectively.
m
The number of 8 bit multiplier array cycles is required to complete the multiply, which is
controlled by the value of the multiplier operand specified by Rs. Its possible values are
as follows
1
If bits [32:8] of the multiplier operand are all zero or all one.
2
If bits [32:16] of the multiplier operand are all zero or all one.
3
If bits [32:24] of the multiplier operand are all zero or all one.
4
In all other cases.
ASSEMBLER SYNTAX
MUL{cond}{S} Rd,Rm,Rs
MLA{cond}{S} Rd,Rm,Rs,Rn
{cond}
{S}
Rd, Rm, Rs and Rn
Two-character condition mnemonic. See Table 3-2..
Set condition codes if S present
Expressions evaluating to a register number other than R15.
EXAMPLES
MUL
MLAEQS
R1,R2,R3
R1,R2,R3,R4
; R1:=R2*R3
; Conditionally R1:=R2*R3+R4, Setting condition codes.
3-24