K4H2G0638A-UC Datasheet, PDF (16/23 Pages) Samsung semiconductor – Stacked 2Gb A-die SDRAM Specification

DDR SDRAM stacked 2Gb A-die (x4)
Preliminary
DDR SDRAM
20.0 System Characteristics for DDR SDRAM
The following specification parameters are required in systems using DDR333, DDR266 & DDR200 devices to ensure proper system
performance. these characteristics are for system simulation purposes and are guaranteed by design.
Table 1 : Input Slew Rate for DQ, DQS, and DM
AC CHARACTERISTICS
DDR333
DDR266
PARAMETER
SYMBOL MIN
MAX
MIN
MAX
DQ/DM/DQS input slew rate measured between
VIH(DC), VIL(DC) and VIL(DC), VIH(DC)
DCSLEW TBD
TBD
TBD
TBD
Table 2 : Input Setup & Hold Time Derating for Slew Rate
Input Slew Rate
∆tIS
∆tIH
Units
Notes
0.5 V/ns
0
0
ps
i
0.4 V/ns
+50
0
ps
i
0.3 V/ns
+100
0
ps
i
Table 3 : Input/Output Setup & Hold Time Derating for Slew Rate
Input Slew Rate
∆tDS
∆tDH
Units
Notes
0.5 V/ns
0
0
ps
k
0.4 V/ns
+75
+75
ps
k
0.3 V/ns
+150
+150
ps
k
Table 4 : Input/Output Setup & Hold Derating for Rise/Fall Delta Slew Rate
Delta Slew Rate
∆tDS
∆tDH
Units
Notes
+/- 0.0 V/ns
0
0
ps
j
+/- 0.25 V/ns
+50
+50
ps
j
+/- 0.5 V/ns
+100
+100
ps
j
Table 5 : Output Slew Rate Characteristice (X4, X8 Devices only)
Slew Rate Characteristic
Typical Range
(V/ns)
Minimum
(V/ns)
Maximum
(V/ns)
Notes
Pullup Slew Rate
1.2 ~ 2.5
1.0
4.5
a,c,d,f,g,h
Pulldown slew
1.2 ~ 2.5
1.0
4.5
b,c,d,f,g,h
Table 6 : Output Slew Rate Characteristice (X16 Devices only)
Slew Rate Characteristic
Typical Range
(V/ns)
Minimum
(V/ns)
Maximum
(V/ns)
Notes
Pullup Slew Rate
1.2 ~ 2.5
0.7
5.0
a,c,d,f,g,h
Pulldown slew
1.2 ~ 2.5
0.7
5.0
b,c,d,f,g,h
DDR200
MIN
MAX
0.5
4.0
Table 7 : Output Slew Rate Matching Ratio Characteristics
AC CHARACTERISTICS
DDR266B
PARAMETER
MIN
MAX
Output Slew Rate Matching Ratio (Pullup to Pulldown) TBD
TBD
DDR200
MIN
MAX
0.67
1.5
Notes
e, l
Units
V/ns
Notes
a, l
Rev. 0.0 June. 2005