CL05C101JB5NNNC Datasheet, PDF (1/2 Pages) Samsung semiconductor – CAP, 100㎊, 50V, ±5%, C0G, 0402

SPECIFICATION
• Supplier : Samsung electro-mechanics
• Product : Multi-layer Ceramic Capacitor
A. Samsung Part Number
• Samsung P/N : ^{CL05C101JB5NNNC}
• Description : CAP, 100㎊, 50V, ±5%, C0G, 0402
CL 05 C 101 J B 5 N N N C
① ②③ ④ ⑤⑥⑦⑧⑨⑩⑪
① Series
② Size
Samsung Multi-layer Ceramic Capacitor
0402 (inch code)
L: 1.0 ± 0.05 mm
W: 0.5 ± 0.05 mm
③ Dielectric
④ Capacitance
⑤ Capacitance
tolerance
⑥ Rated Voltage
⑦ Thickness
C0G
100 ㎊
±5 %
50 V
0.5 ± 0.05 mm
⑧ Inner electrode
Termination
Plating
⑨ Product
⑩ Special
⑪ Packaging
Ni
Cu
Sn 100% (Pb Free)
Normal
Reserved for future use
Cardboard Type, 7" reel
B. Samsung Reliablility Test and Judgement condition
Capacitance
Q
Insulation
Resistance
Appearance
Withstanding
Voltage
Temperature
Characterisitcs
Adhesive Strength
of Termination
Bending Strength
Solderability
Performance
Test condition
Within specified tolerance
1㎒±10%
0.5~5Vrms
1000 min
10,000Mohm or 500Mohm⋅㎌
Rated Voltage 60~120 sec.
Whichever is Smaller
No abnormal exterior appearance
Microscope (×10)
No dielectric breakdown or
300% of the rated voltage
mechanical breakdown
C0G
(From -55℃ to 125℃, Capacitance change shoud be within ±30PPM/℃)
No peeling shall be occur on the
500g⋅F, for 10±1 sec.
terminal electrode
Capacitance change :
Bending to the limit (1mm)
within ±5% or ±0.5㎊ whichever is larger with 1.0mm/sec.
More than 75% of terminal surface
SnAg3.0Cu0.5 solder
is to be soldered newly
245±5℃, 3±0.3sec.
(preheating : 80~120℃ for 10~30sec.)
Resistance to
Soldering heat
Capacitance change :
Solder pot : 270±5℃, 10±1sec.
within ±2.5% or ±0.25㎊ whichever is larger
Tan δ, IR : initial spec.