LS33600C Datasheet, PDF (2/2 Pages) saftbatteries – 3.6 V Primary lithium-thionyl chloride High energy D-size bobbin cell

LS 33600C
Ø 33.1 ± 0.3
Ø 9.3 ± 0.1
(on flat surface)
2.1 ± 0.2
61.0 ± 0.6
0.5
Ø 18.0 ± 0.2
(on flat surface)
Finished version with protruding positive end cap
Ø 33.1 ± 0.3
Ø 13.8 ± 0.2
(on flat surface)
0.6 ± 0.2
59.6 ± 0.6
0.5
Ø 18.0 ± 0.2
(on flat surface)
Finished version with flat positive end cap
Dimensions in mm.
Storage
• The storage area should be clean,
cool (preferably not exceeding
+ 30°C), dry and ventilated.
Warning
• Fire, explosion and burn hazard.
• Do not recharge, short circuit,
crush, disassemble, heat above
100°C (212°F), incinerate,
or expose contents to water.
• Do not solder directly to the cell
(use tabbed cell versions instead).
Saft
Specialty Battery Group
12, rue Sadi Carnot
93170 Bagnolet - France
Tel [phone]
Fax [phone]
www.saftbatteries.com
3.6
3.5
3.4
3.3
+ 20°C
3.2
3.1
3.0
- 20°C
2.9
2.8
1
10
100
Current (mA)
Voltage plateau versus Current and Temperature (at mid-discharge)
3.6
3.4
3.2
3.0
2.8
2.6
2.4
2.2
2.0
1.8
0.1
1
10
100
1000
Time (hours)
Typical discharge profiles at + 20°C
10000
18.0
16.0
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0
1
- 20°C
10
+ 20°C
100
Current (mA)
Restored Capacity versus Current and Temperature (2.0 V cut off)
Doc. N^o 31017-2-1106
Information in this document is subject to change without notice
and becomes contractual only after written confirmation by Saft.
For more details on primary lithium technologies please refer to
Primary Lithium Batteries Selector Guide Doc N^o 31048-2.
Published by the Communications Department.
Photo credit: Saft
Société anonyme au capital de 31 944 000
RCS Bobigny B 383 703 873
Produced by Arthur Associates