02S30R-MSOTS3 Datasheet, PDF (3/3 Pages) Rosenberger Hochfrequenztechnik GmbH & Co. KG – Calibration Kit

Technical Data Sheet
RPC-2.92
Calibration Kit
Plug
02S30R-MSOTS3
Open
Offset Z_o / Impedance / Z_o
Offset Delay
Length (electrical) / Offset Length
Offset Loss
Loss
Fringing Capacitances
Short
Offset Z_o / Impedance / Z_o
Offset Delay
Length (electrical) / Offset Length
Offset Loss
Loss
Short Inductance
Load
Offset Z_o / Impedance / Z_o
Offset Delay
Length (electrical) / Offset Length
Offset Loss
Loss
50 Ω
28.353 ps
8.50 mm
2.40 GΩ/s
0.0118 dB/ GHz
C₀ = -7.38000 x 10^-15 F
/
C₁ = 1180.00 x 10^-27 F/Hz /
C₂ = -44.8000 x 10^-36 F/Hz² /
C₃ = 0.54000 x 10^-45 F/Hz³ /
-7.38000 fF
1.18000 fF /GHz
-0.04480 fF /GHz²
0.00054 fF /GHz³
50 Ω
28.353 ps
8.50 mm
2.40 GΩ/s
0.0118 dB/ GHz
L₀ = 0.0000 x 10^-12 H
/ 0.0000 pH
L₁ = 0.0000 x 10^-24 H/Hz
/ 0.0000 pH/GHz
L₂ = 0.0000 x 10^-33 H/Hz² / 0.0000 pH/GHz²
L₃ = 0.0000 x 10^-42 H/Hz³ / 0.0000 pH/GHz³
50 Ω
0.0000 ps
0.000 mm
0.00 GΩ/s
0.0000 dB/ GHz
Environmental data
Operating temperature range³
Rated temperature range of use⁴
Storage temperature range
RoHS
+20 °C to +26 °C
0 °C to +50 °C
-40 °C to +85 °C
compliant
3 _{Temperature range over which these specifications are valid.}
4 _{This range is underneath and above the operating temperature range, within the calibration kit is fully functional}
and could be used without damage
Packing
Standard
Weight
1 pce in bag
42 g/pce
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on
our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our
products, we reserve the right to make changes judged to be necessary.
Draft
Marcel Panicke
Date
05.11.15
Approved
Markus Müller
Date
12.10.16
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260 D-84526 Tittmoning Germany
www.rosenberger.de
Rev. Engineering change number
e00
16-1687
Tel. : [phone]
Email : [e-mail]
Name
Marion Striegler
Date
12.10.16
Page
3/3