D-31M Datasheet, PDF (4/7 Pages) Roithner LaserTechnik GmbH – Driver for MID-IR LEDs

512 Hz
0,6
0,8
1
1,2
2
4
8
10
15
20
Frequency
2 kHz
8 kHz
16 kHz
Table 1. Permissible and impermissible combinations
of frequency and pulse duration in pulse mode.
7. Operating Instruction
1. Carefully combine the wires of the LED with pins of connector “LED” (1) tightly till fixation.
Note! Marked with the red point pin of connector “LED” must be connected with the appropriate
wire of the LED (It’s marked with the red point too). In the case of wrong junction the LED
can be damaged.
Fig.4. Observance of polarity during the connection
between the LED and the LED connector (1).
Note! LED case must be electrically isolated.
09.07.2012
D-31M
4 of 7