D-31M Datasheet, PDF (2/7 Pages) Roithner LaserTechnik GmbH – Driver for MID-IR LEDs

5. Appearance of the Driver and its Interface
Fig.1.Appearance of the driver and its interface.
1. The jack for the LED connection.
2. Lookup table of switch position and pulse
duration.
(The table for switch position correlation
with pulse duration)
3. The multiposition switch for adjusting the
pulse duration.
4. The indicators of selected frequency.
5. The button of frequency selection.
6. The jack for the cable of AC/DC adapter.
7. The jack for synchronization cable.
8. The button of mode selection.
9. The start/stop button of LED power
supply.
10. The LED current indicator.
11. The red LED indicator of failure of LED
current.
12. The multiposition switch for adjusting the
LED current.
13. The green LED indicator of pulse mode.
14. The green LED indicator of QCW mode.
15. Lookup table of switch position and LED
current amplitude.
(The table for switch position correlation
with LED current amplitude)
09.07.2012
D-31M
2 of 7