BD9161FVM_12 Datasheet, PDF (9/19 Pages) Rohm – 2.5V to 4.5V, 0.6A 1ch Synchronous Buck Converter Integrated FET

BD9161FVM
Datasheet
Description of Operations
・Soft-start function
EN terminal shifted to “High” activates a soft-starter to gradually establish the output voltage with the current limited
during startup, by which it is possible to prevent an overshoot of output voltage and an inrush current.
・Shutdown function
With EN terminal shifted to “Low”, the device turns to Standby Mode, and all the function blocks including reference
voltage circuit, internal oscillator and drivers are turned to OFF. Circuit current during standby is 0μF (Typ.).
・UVLO function
Detects whether the input voltage sufficient to secure the output voltage of this IC is supplied. And the hysteresis width
of 50 mV (Typ.) is provided to prevent output chattering.
Hysteresis 50mV
VCC
EN
VOUT
Standby mode
Tss
Soft start
Operating mode
Tss
Tss
Standby
mode
Operating mode
Standby
mode
Operating mode
Standby mode
UVLO
UVLO
EN
Fig.22 Soft start, Shutdown, UVLO timing chart
UVLO
・Short-current protection circuit with time delay function
Turns OFF the output to protect the IC from breakdown when the incorporated current limiter is activated continuously for
the fixed time (TLATCH) or more. The output thus held tuned OFF may be recovered by restarting EN or by re-unlocking
UVLO.
EN
VOUT
Limit
IL
Standby
mode
Output OFF
latch
Operating mode
1msec
Standby
mode
Operating mode
EN
Timer latch
EN
Fig.23 Short-current protection circuit with time delay timing chart
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
TSZ22111ï½¥15ï½¥001
9/17
TSZ02201-0J3J0AJ00190-1-2
02.MAR.2012 Rev.001