TCFG_A Datasheet, PDF (5/13 Pages) Rohm – Chip tantalum capacitors (Fail-safe open structure type)

Tantalum capacitors
TCFG Series A Case
Item
Dimensions
Performance
Be based on "External dimensions"
Resistance to solvents The indication should be clear.
Solderability
3/4 or more surface area of the solder coated
terminal dipped in the soldering bath should be
covered with the new solder.
Test conditions
(based on JIS C5101-1 and JIS C5101-3)
Measure using a caliper of JIS B 7505
Class 2 or higher grade.
As per 4.32 JIS C 5101-1
As per 4.18 JIS C 5101-3
Dip in the isopropyl alcohol for 30±5s,
at room temperature.
As per 4.15.2 JIS C 5101-1
As per 4.7 JIS C 5101-3
Dip speed = 25±2.5mm/s
Pre-treatment (accelerated aging) : Leave the
sample on the boiling distilled water for 1h.
Solder temp. : 245±5°C
Duration : 3±0.5s
Solder : M705
Flux : Rosin 25%, IPA 75%
Vibration Capacitance The measured value should be stable.
Appearance There should be no significant abnormality.
As per 4.17 JIS C 5101-1
Frequency : 10 to 55 to 10Hz/min.
Amplitude : 1.5mm
Time : 2h each in X and Y directions
Mounting : The terminal is soldered on a print
circuit board.
Rev.D
5/12