 English |
|
|
|
|
|
|
|
| BD9285F Datasheet, PDF (31/39 Pages) Rohm – Boost 1channel white LED driver For large LCDs | |||
| |||
| ◁ |
BD9285F
3.7.6 the SCP detection
Datasheet
(*1)â¦During the soft start, the detection of SCP is masked.
(*2)â¦As SCP is detected, the output GATE=L, DIMOUT=L, and the CP counter starts
(*3)â¦If SCP is released within 4096 clock of CP counter of the GATE pin frequency, the boost operation restarts.
(*4)â¦As the SCP is detected again, the boost operation is stopped.
(*5)â¦As the SCP detection continues up to 4096 count by the CP counter, IC will be latched off.
(*6)â¦The STB=L input can make IC reset. In this chart, DIMOUT asserts high by the discharge function in the paragraph 3.7.3.
(*7)â¦It normally starts as STB turns L to H.
(*8)â¦The operation of the SCP detection is not related to the logic of PWM.
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
TSZ22111ã»15ã»001
31/36
TSZ02201-0F1F0C100030-1-2
11.Jul.2012 Rev.001
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese