BU64987GWZ Datasheet, PDF (3/25 Pages) Rohm – Bi-directional VCM driver for Auto focus

BU64987GWZ
Absolute Maximum Ratings
Parameter
Symbol
Limits
Unit
Power Supply Voltage
VDD
-0.5 to +2.5
V
Control Input voltage^(Note1)
VIN
-0.5 to +5.5
V
Power Dissipation
Pd
0.32^(Note2)
W
Operating Temperature Range
Topr
-25 to +85
°C
Junction Temperature
Tjmax
125
°C
Storage Temperature Range
Tstg
-55 to +125
°C
Output Current
IOUT
+200, -200^(Note3)
mA
(Note 1) VIN is 2-wire serial interface input pins (SCL, SDA).
(Note 2) UCSP30L1 package. Derate by 3.2 mW/°C when operating above Ta=25°C (when mounted in ROHM’s standard board).
(Note 3) Must not exceed Pd, ASO, or Tjmax of 125°C.
Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit
between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over
the absolute maximum ratings.
Recommended Operating Ratings
Parameter
Symbol
Power Supply Voltage
VDD
Control Input Voltage^(Note1)
VIN
2-wire Serial Interface
Frequency
FCLK
Output Current
IOUT
(Note 1) VIN is 2-wire serial interface input pins (SCL, SDA).
(Note 3) Must not exceed Pd, ASO, or Tjmax of 125°C.
Limits
+1.6 to +1.98
0.0 to +4.8
1
+100, -100^(Note3)
Unit
V
V
MHz
mA
www.rohm.com
© 2016 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
3/21
TSZ02201-0K1K0B601860-1-2
6. Oct.2016 Rev.001