BU2507FV_15 Datasheet, PDF (3/21 Pages) Rohm – 10bit 4ch/6ch D/A Converters

BU2507FV BU2508FV
Block Diagrams
BU2507FV
BU2508FV
Absolute Maximum Ratings(TA=25°C)
Parameter
Symbol
Rating
Unit
Supply voltage
VCC
6.0
V
D/A converter upper reference voltage
VDD
6.0
V
Input voltage
VIN
6.0
V
Output voltage
Power dissipation
VOUT
6.0
V
PD
0.70^{(Note 2)}
W
Storage temperature range
Tstg
-55 to +125
°C
(Note 2) Derate by 7.0mW/°C when operating above TA=25°C (when mounted on ROHM’s standard board).
Mounted on a FR4 glass epoxy PCB 70mm x 70mm x 1.6mm (copper foil area less than 3%).
Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit
between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated
over the absolute maximum ratings.
Recommended Operating Conditions
Parameter
Symbol
Limit
Unit
Power supply voltage range
VCC
Operating temperature range
Topr
4.5 to 5.5
V
-30 to +85
°C
www.rohm.co.jp
© 2015 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
3/17
TSZ02201-0RLR0GZ10150-1-2
11.Dec.2015 Rev.001