BU2505FV_15 Datasheet, PDF (3/22 Pages) Rohm – 10bit 8ch/10ch D/A Converters

BU2505FV BU2506FV
Block Diagrams
Absolute Maximum Ratings(TA=25°C)
Supply voltage
Parameter
D/A converter upper reference voltage
Input voltage
Output voltage
Power dissipation
Storage temperature range
BU2505FV
Symbol
VCC
VDD
VIN
VOUT
PD
Tstg
(Note 3) Derate by 7.5mW/°C when operating above TA=25°C (when mounted on ROHM’s standard board).
Mounted on a FR4 glass epoxy PCB 70mm x 70mm x 1.6mm (copper foil area less than 3%).
Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit
between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated over
the absolute maximum ratings.
Recommended Operating Conditions
Supply voltage range
Parameter
Operating temperature range
www.rohm.co.jp
© 2015 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
Symbol
VCC
Topr
Rating
6.0
6.0
6.0
6.0
0.75^{(Note 3)}
-55 to +125
Limit
4.5 to 5.5
-30 to +85
3/18
Unit
V
V
V
V
W
°C
Unit
V
°C
BU2506FV
TSZ02201-0RLR0GZ10140-1-2
11.Dec.2015 Rev.001