BU2505FV_15 Datasheet, PDF (16/22 Pages) Rohm – 10bit 8ch/10ch D/A Converters

BU2505FV BU2506FV
Operational Notes – continued
12. Regarding the Input Pin of the IC
In the construction of this IC, P-N junctions are inevitably formed creating parasitic diodes or transistors. The
operation of these parasitic elements can result in mutual interference among circuits, operational faults, or physical
damage. Therefore, conditions which cause these parasitic elements to operate, such as applying a voltage to an
input pin lower than the ground voltage should be avoided. Furthermore, do not apply a voltage to the input pins
when no power supply voltage is applied to the IC. Even if the power supply voltage is applied, make sure that the
input pins have voltages within the values specified in the electrical characteristics of this IC.
13. Ceramic Capacitor
When using a ceramic capacitor, determine the dielectric constant considering the change of capacitance with
temperature and the decrease in nominal capacitance due to DC bias and others.
14. Area of Safe Operation (ASO)
Operate the IC such that the output voltage, output current, and power dissipation are all within the Area of Safe
Operation (ASO).
Ordering Information
BU2 5 0 x F V -
E2
Part Number
5:BU2505FV
6:BU2506FV
Package
FV:SSOP-B20
Packaging and forming specification
E2: Embossed tape and reel
Marking Diagrams
SSOP-B20(TOP VIEW)
2505FV
SSOP-B20(TOP VIEW)
Part Number Marking
LOT Number
2506FV
Part Number Marking
LOT Number
1PIN MARK
1PIN MARK
www.rohm.co.jp
© 2015 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
16/18
TSZ02201-0RLR0GZ10140-1-2
11.Dec.2015 Rev.001