BD8LB600FS-C Datasheet, PDF (24/27 Pages) Rohm – 8ch Low-side switch

BD8LB600FS-C
Datasheet
Revision History
Date
Revision
Changes
06.Sep.2013
03.Apr.2015
002
New Release
P1 Add “AEC-Q100 qualified” to Features
P3 active clamp energy condition added
P4 Limit(Typ) of VDDA Operating current changed
P4 Limit values of L level input current 2(CS_B) changed
P5 Condition of “Open Load release voltage”, “Open load detection threshold voltage” and
“Open load detection time” added
P6 Modify Figure 5.
P7 Modify DIR(Direct)mode Diagnostic Output Truth Table
P9 Characteristic Data of L level input current 2(CS_B) changed
P11 Timing Chart with Inductive Load changed
P12 I/O Equivalent Circuits changed
003
P13 initial value of INn added
P15 add note to SPI RST_B sequence
P16 SPI timing chart and add note changed
P17 DIR (direct) mode timing chart (1) and note changed
P18 Figure 26. and note changed
P18 Figure 27. changed
P19 timing chart of  Overcurrent protection and  Overheat protection changed
explanation of error flag release changed
P20  Open detection changed
P22 “7) Operation Under Strong Electromagnetic Field” added
P23 “15) FIN” deleted
Whole page all unit changed to SI unit
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
24/24
TSZ02201-0G3G0BD00050-1-2
03.Apr.2015 Rev.003