BD8LB600FS-C Datasheet, PDF (1/27 Pages) Rohm – 8ch Low-side switch

Datasheet
IPD series for Automotive
8ch Low-side switch
BD8LB600FS-C
Features
■ Monolithic power IC that has a built-in control part
(CMOS) and a power MOS FET on 1chip
■ 8ch Low-side switch for driving resistive, inductive,
capacitive load
■ 16bit Serial peripheral interface(SPI) for diagnostics
and control
■ Built-in Open Load Detection circuit in output-off state
■ Built-in Self restart Over Current Protection circuit
(OCP)
■ Built-in Over Voltage Protection for Output circuit
■ Built-in Self restart Over Heating Protection circuit
(TSD）
■ Low On resistance of RON=600mΩ(VIN=5V, Tj=25°C,
IDn=0.2A)
■ Surface mount SSOP-A24 Package
■ AEC-Q100 Qualified⁽¹⁾
(1)Grade 1
Overview
BD8LB600FS-C is an Automotive 8ch Low-Side switch.
It has a built-in Over Current Protection circuit, Thermal
Shutdown circuit, Open Load Detection circuit, Under
Voltage Lock Out circuit, and has a Diagnostic
Output(SO) function during abnormal detection.
Application
8ch Low-side switch for driving resistive,
inductive, capacitive load
Basic Application Circuit (Recommendation)
Product Summary
Digital part Operating voltage
Analog part Operating voltage
On-state resistance(25°C,Typ)
Over current limit(Typ)
Active clamp energy(25°C)
3.0V to 5.5V
4.0V to 5.5V
600mΩ
1.80A
70mJ
Package
SSOP-A24
10.00mm x 7.80mm x 2.10mm
SSOP-A24
Product configuration: Silicon monolithic integrated circuit
www.rohm.com
© 2015 ROHM Co., Ltd. All rights reserved.
TSZ22111・14・001
○The product is not designed for radiation resistance.
1/24
TSZ02201-0G3G0BD00050-1-2
03.Apr.2015 Rev.003