English
Language : 

BU52012NVX Datasheet, PDF (2/5 Pages) Rohm – Hall effect Switch
2/4
●MAGNETIC, ELECTRICAL CHARACTERISTICS (Unless otherwise specified, VDD=3.00V, Ta=25℃)
PARAMETERS
SYMBOL
LIMIT
UNIT
MIN TYP MAX
CONDITIONS
Operate Point
BopS
-
3.0 5.0 mT
Release Point
BrpS
0.6 2.1
- mT
Period
Tp
-
50 100 ms
Output High Voltage
VOH
VDD
-
-0.2
-
V
B<BrpS ※3
IOUT=-0.5mA
Output Low Voltage
VOL
-
-
0.2
V
BopS<B ※3
IOUT=+0.5mA
Supply Current1
IDD1(AVG)
-
3.5 5.5 μA VDD=1.8V,Average
Supply Current2
IDD2(AVG)
-
8.0 12.5 μA VDD=3.0V,Average
※3. B=Magnetic Flux Density
1mT=10Gauss
Positive (“+”) polarity flux is defined as the magnetic flux from south pole which is direct toward to
the branded face of the sensor.
After applying power supply, it takes one cycle of period (TP) to become definite output.
REV. A