BU97520AKV-M Datasheet, PDF (13/44 Pages) Rohm – AEC-Q100 Qualified

BU97520AKV-M
Datasheet
10. PG1, PG2, PG3, PG4, PG5, PG6: PWM/General Purpose output control data
This control data bit select either PWM output or General Purpose output of Sx/Px/Gx pins.(x=1 to 6)
PGx(x=1 to 6)
Mode
0
PWM output
1
General Purpose output
<PWM<->GPO Changing function>
Normal behavior of changing GPO to PWM is below.
- PWM operation is started by command import timing of DD: 01 during GPO -Æ PWM change.
- Please take care of reflect timing of new duty setting of DD: 10 and DD: 11 is from the next PWM.
SCE
DD: 00
DD: 01
DD: 10
DD: 11
GPO ‐‐‐> PWM change
new duty decided timing
PWM/GPO output
start of PWM operation
(PWM waveform in immediate duty)
next PWM cycle
(PWM waveform in new duty)
In order to avoid this operation, please input commands in reverse as below.
SCE
DD:11
DD:10
new duty decided timing
PWM/GPO output
DD:01
DD:00
GPO ‐‐＞PWM change
Start of PWM operation
(PWM waveform on new duty)
11. PF0, PF1, PF2, PF3: PWM output waveform frame frequency control data
These control data bits set the frame frequency for PWM output waveforms.
PF0
PF1
PF2
PF3
PWM output Frame Frequency fp(Hz)
0
0
0
0
fosc/4096
0
0
0
1
fosc/3840
0
0
1
0
fosc/3584
0
0
1
1
fosc/3328
0
1
0
0
fosc/3072
0
1
0
1
fosc/2816
0
1
1
0
fosc/2560
0
1
1
1
fosc/2304
1
0
0
0
fosc/2048
1
0
0
1
fosc/1792
1
0
1
0
fosc/1536
1
0
1
1
fosc/1280
1
1
0
0
fosc/1024
1
1
0
1
fosc/768
1
1
1
0
fosc/512
1
1
1
1
fosc/256
www.rohm.com
© 2014 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
13/41
TSZ02201-0P4P0D300570-1-2
19.Mar.2015 Rev.006