BU52002GUL_10 Datasheet, PDF (11/14 Pages) Rohm – Unipolar Detection Hall ICs

BU52002GUL,BU52003GUL,BU52012HFV,BU52013HFV
●Position of the Hall Effect IC(Reference)
VCSP50L1
0.55
0.55
HVSOF5
0.6
0.8
0.35
0.2
(UNIT：mm)
Technical Note
●Footprint dimensions (Optimize footprint dimensions to the board design and soldering condition)
VCSP50L1
HVSOF5
(UNIT：mm)
Strings
e
b3
SD
SE
Size(Typ.)
0.50
0.25
0.25
0.25
●Terminal Equivalent Circuit Diagram
Because they are configured for CMOS (inverter) output, the output pins require no external resistance and allow direct
connection to the PC. This, in turn, enables reduction of the current that would otherwise flow to the external resistor during
magnetic field detection, and supports overall low current (micropower) operation.
OUT
V_DD
Fig.40
GND
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
11/13
2010.01 - Rev.B