BU52058GWZ Datasheet, PDF (10/18 Pages) Rohm – Omnipolar Detection Hall IC

BU52058GWZ
●Position of the Hall Element (Reference)
UCSP35L1
0.40
0.40
0.25
Datasheet
(UNIT：mm)
●Footprint dimensions (Optimize footprint dimensions to the board design and soldering condition)
UCSP35L1
SD
b3
e
Symbol
e
b3
SD
SE
Reference
value
0.40
φ0.20
0.20
0.20
(UNIT：mm)
●Terminal Equivalent Circuit Diagram
OUT1, OUT2
VDD
Because they are configured for CMOS (inverter) output, the
output pins require no external resistance and allow direct
connection to the PC. This, in turn, enables reduction of the
current that would otherwise flow to the external resistor
during magnetic field detection, and supports overall low
current (micropower) operation.
Figure 20
GND
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
10/14
TSZ02201-0M3M0F413010-1-2
14.Feb.2013 Rev.001