BU52040HFV_10 Datasheet, PDF (10/13 Pages) Rohm – Bipolar Latch Hall IC

BU52040HFV
●Footprint dimensions (Optimize footprint dimensions to the board design and soldering condition)
HVSOF5
Technical Note
(UNIT：mm)
●Terminal Equivalent Circuit Diagram
Because they are configured for CMOS (inverter) output, the output pins require no external resistance and allow direct
connection to the PC. This, in turn, enables reduction of the current that would otherwise flow to the external resistor during
magnetic field detection, and supports overall low current (micropower) operation.
OUT
VDD
Fig.18
GND
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
10/12
2010.01 - Rev.B