MNA14 Datasheet, PDF (1/9 Pages) Rohm – Multi-layer ceramic chip capacitor networks

Ceramic capacitors
Multi-layer ceramic chip capacitor
networks
MNA14
MNA14 (1608 (0603) × 4 size, chip capacitor networks)
!Features
1) Area ratio is approximately 55% smaller than that of
the MCH18, enabling high - density mounting.
2) Mounting costs are reduced.
3) Use of convex electrodes prevents solder bridging
during mounting, and makes it easy to perform
a visual inspection of the mounted piece.
Also facilitates automatic inspection.
4) Barrier layer and end terminations to improve
solderability.
5) Each element is independent to ensure a wide
range of circuit applications.
6) Can be packed on tape.
!External dimensions (Units : mm)
0.55±0.1 0.7±0.2
0.85±0.1
0.8±0.1
3.2±0.2
0.8±0.1
∗Land pattern in 0.8mm pitch between each electrode is recommended.
!Structure
!Equivalent circuits
C1 C2 C3 C4
C1 = C2 = C3 = C4
Internal electrode
Ceramic element
External electrode ΙΙΙ (coating layer)
External electrode ΙΙ (barrier layer)
External electrode Ι (thick membrane layer)
∗The design and specifications are subject to change without prior notice. Before ordering or using, please check the latest technical specification.