BU90R104_15 Datasheet, PDF (1/22 Pages) Rohm – 35bit LVDS Receiver

Datasheet
LVDS Interface LSI
35bit LVDS Receiver
5:35 DeSerializer
BU90R104
●General Description
The BU90R104 receiver operates from 8MHz to 112MHz
wide clock range.
The BU90R104 converts the LVDS serial data streams
back into 35bits of LVCMOS parallel data.
Data is transmitted seven times (7X) stream and reduce
the cable number by 3(1/3) or less.
I/O Voltage range is 2.3 to 3.6V,so it is available for many
products.
●Key Specifications
■Supply Voltage Range
■Operating Frequency
■Operating Temperature Range
2.30 to 3.60 V
8 to 112 MHz
-40 to +85 ℃
●Packages
TQFP64V
12.0mm×12.0mm×1.0mm
●Applications
■Flat panel display
■Security camera, Digital camera
■Tablet
●Features
■5 channels of LVDS data stream are converted to 35bits
data of parallel LVCMOS level outputs.
■30bits of RGB output data, 5bits of timing and control
output data(HSYNC, VSYNC, DE, CTL1 and CTL2) are
transmitted available.
■Support clock frequency from 8MHz up to 112MHz.
■Support consumer video format including 480i, 480P,
720P and 1080i as well.
■Support many kinds of PC video formats such as VGA,
SVGA, XGA and SXGA.
■Provide 784Mbps per 1ch or 3.92Gbps per device
throughput rate using 112MHz clock rate.
■User programmable LVCMOS data output triggering timing
by using either rising or falling edge of clock.
■30bit LVDS transmitter is recommended to use BU8254KVT.
○Product structure：Silicon monolithic integrated circuit
www.rohm.co.jp
© 2011 ROHM Co., Ltd. All rights reserved.
TSZ22111・14・001
○This product is not designed protection against radioactive rays
1/18
TSZ02201-0L2L0H500030-1-2
27.Feb.2015 Rev.002