BU90R102 Datasheet, PDF (1/29 Pages) Rohm – Support clock frequency from 8MHz up to 160MHz

Datasheet
LVDS Interface LSI
67bit LVDS Receiver
BU90R102
General Description
The BU90R102 receiver operates from 8MHz to 160MHz
wide clock range.
The BU90R102 converts the 10 Lane (2Channel) LVDS
serial data streams back into 67bit of LVCMOS parallel
data.
Data is transmitted seven times (7X) stream and reduce
the cable number by 3(1/3) or less.
I/O Voltage range is 2.3 to 3.6V, so it is available for
many products.
Flexible Input /Output mode is suitable for a variety of
application Interface.
Key Specifications
■Supply Voltage Range
■Operating Frequency
■Operating Temperature Range
2.30 to 3.60 V
8 to 160 MHz
-40 to +85 ℃
Package
HQFP144VM
W(Typ) x D(Typ) x H(Max)
20.0mm × 20.0mm × 1.6mm
Applications
■Security camera, Digital camera
■Tablet
■Flat panel display
Features
■The maximum data rate is 1120Mbps/Lane
■It enables to receive the 60bit of RGB data,
7bit of Timing and Control data
■Support clock frequency from 8MHz up to 160MHz
■Flexible Input /Output mode
1. Single-in / Single-out
2. Single-in / Dual-out
3. Dual-in / Single-out
4. Dual-in / Dual-out
■Power down mode
■Clock edge selectable
■Support spread spectrum clock generator input
Block Diagram
Figure 1. Block Diagram
〇Product structure : Silicon monolithic integrated circuit
.www.rohm.com
© 2014 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 14 • 001
〇This product has no designed protection against radioactive rays
1/26
TSZ02201-0L2L0H500280-1-2
02.Oct.2014 Rev.001