R1150H_17 Datasheet, PDF (6/30 Pages) RICOH electronics devices division – VOLTAGE REGULATOR (with Wide Input Voltage Range) with RESET

R1150H
• Standby Current (Topt=25°C)
Detector Threshold Voltage
-VDET (V)
2.3V ≤ (-VDET) ≤ 3.0V
3.1V ≤ (-VDET) ≤ 15.0V
VR part
• Output Current (Topt=25°C)
Output Voltage VOUT (V)
2.1V ≤ VOUT ≤ 2.9V
3.0V ≤ VOUT ≤ 4.0V
4.1V ≤ VOUT ≤ 14.0V
• Load Regulation (Topt=25°C)
Output Voltage VOUT (V)
2.1V ≤ VOUT ≤ 3.0V
3.1V ≤ VOUT ≤ 5.0V
5.1V ≤ VOUT ≤ 10.0V
10.1V ≤ VOUT ≤ 14.0V
• Dropout Voltage (Topt=25°C)
Output Voltage VOUT (V)
2.1V ≤ VOUT ≤ 2.4V
2.5V ≤ VOUT ≤ 3.0V
3.1V ≤ VOUT ≤ 7.0V
7.1V ≤ VOUT ≤ 10.0V
10.1V ≤ VOUT ≤ 14.0V
VD part
• Test Conditions for Output Current
Detector Threshold Voltage
-VDET (V)
2.3V ≤ (-VDET) ≤ 15.0V
Supply Current (µA)
Typ.
Max.
2.5
5.0
3.0
6.0
Output Current (mA)
Min.
Typ.
90
140
120
170
150
200
Load Regulation (mV)
Typ.
Max.
15
35
25
45
40
65
50
80
Dropout Voltage (V)
Typ.
Max.
0.40
0.60
0.30
0.40
0.25
0.35
0.27
0.45
0.30
0.50
Conditions
VIN=2V, VDS=0.05V
RECOMMENDED OPERATING CONDITIONS (ELECTRICAL CHARACTERISTICS)
All of electronic equipment should be designed that the mounted semiconductor devices operate within the
recommended operating conditions. The semiconductor devices cannot operate normally over the
recommended operating conditions, even if when they are used over such conditions by momentary
electronic noise or surge. And the semiconductor devices may receive serious damage when they continue
to operate over the recommended operating conditions.
6