RV5C348A-E2-F Datasheet, PDF (15/47 Pages) RICOH electronics devices division – 4-wire Serial Interface

RT5C348B (TSSOP10G) and RS5C348B (SSOP10) are the discontinued products. As of July in 2016.
Rx5C348A/B
restart of oscillation. As such, the XSTP bit can be applied to judge the validity of clock and calendar data
after power-on or a drop in supply voltage.
* When the XSTP bit is set to 1, all bits will be reset to 0 in the Oscillation Adjustment Register, Control
Register 1, and Control Register 2, stopping the output from /INTR pin and starting the output of 32.768-kHz
clock pulses from the 32KOUT pin.
* The XSTP bit accepts only the writing of 0, which restarts the oscillation halt sensing circuit. Conversely,
setting the XSTP bit to 1 causes no event.
* It is recommendable to frequently check the XSTP bit for setting errors or data garbles, which may
seriously affect the operation of the Rx5C348A/B.
12345
- 15 -