RT8841 Datasheet, PDF (21/32 Pages) Richtek Technology Corporation – 4/3/2/1-Phase PWM Controller for High-Density Power Supply

RT8841
Note 1. Stresses listed as the above “Absolute Maximum Ratings” may cause permanent damage to the device. These are for
stress ratings. Functional operation of the device at these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended
periods may remain possibility to affect device reliability.
Note 2. θJA is measured in the natural convection at TA = 25°C on a effective single layer thermal conductivity test board of
JEDEC thermal measurement standard.
Note 3. Devices are ESD sensitive. Handling precaution is recommended.
Note 4. The device is not guaranteed to function outside its operating conditions.
DS8841-01 April 2011
www.richtek.com
21