204PRO4-433F Datasheet, PDF (6/6 Pages) rfsolutions.ltd – Professional Radio Control

Professional Radio Control
PRO
Series
Technical Specifications
Transmitters
204 Series
Dimensions
Battery
205 Series
Dimensions
Battery
96 x 47 x 23mm
2 x CR2016 Lithium Cell
4 Switch unit
8 / 16 Switch unit
4 Switch unit
8 / 16 Switch unit
105 x 58 x 18 (not including ANT)
250 x 90 x 41 (not including ANT)
2x AAA
2 x CR2016 Lithium Cell
Receiver Unit
Dimensions
315 x 235 x 130mm
Insulation class II
Sealed hinged lid screws
DIN Rails mounted on steel plate
Integrated 12Vdc moulded Power Supply
5 Amp Fused terminal block
Material GW PLAST 120 °C
A 12Vdc power supply is incorporated. 12Vdc is presented on a fused terminal block. A Gland is
supplied to enable power to enter the enclosure.
Learning Capacity:
Dimensions
External
Internal
DIN Rail length 1
DIN Rail length 2
The receiver has the capacity to learn upto 50 units
(Where 1 unit is defined as a button on a transmitter)
315 x 235 x 130mm
300 x 220 x 120mm
285mm
180mm
Technical Specifications
Input Voltage
110-240Vac
Output Voltage
12Vdc +/-5%
Output Current
1A
Output Polarity:
White Dashed Wire =+12V
Storage Temperature: -10 to +70^o Celsius.
Operating Temperature: 0 to +55^o Celsius.
Electrical Characteristics
Supply Voltage: 12V Supply
Supply Voltage: 24V Supply
Supply Current : Quiescent
Time from Tx Switch depressed to 210Rx output
Time from Tx Switch release to Decoder output
Switched output Voltage (I out = 1mA)
Logic Low
Logic High
Min
Typical
Max
10
12
16
21
24
30
25
100
200
0
0.2
0.8
3.5
3.8
5
Units
V
V
mA
mS
mS
V
V
DS200PRO-3 June ’07
©2007 RF Solutions Ltd, www.rfsolutions.co.uk Page 6