RF5189_06 Datasheet, PDF (9/10 Pages) RF Micro Devices – 3V, 2.45GHz LINEAR POWER AMPLIFIER

RF5189
PCB Design Requirements
PCB Surface Finish
The PCB surface finish used for RFMD’s qualification process is electroless nickel, immersion gold. Typical thickness is
3μinch to 8μinch gold over 180μinch nickel.
PCB Land Pattern Recommendation
PCB land patterns are based on IPC-SM-782 standards when possible. The pad pattern shown has been developed and
tested for optimized assembly at RFMD; however, it may require some modifications to address company specific
assembly processes. The PCB land pattern has been developed to accommodate lead and package tolerances.
PCB Metal Land Pattern
A = 0.69 x 0.28 (mm) Typ.
B = 0.28 x 0.69 (mm) Typ.
C = 1.45 (mm) Sq.
1.00 Typ.
Pin 12
BBB
Dimensions in mm.
Pin 1
A
0.50 Typ.
A
A
0.78 Typ.
0.78 Typ.
Figure 1. PCB Metal Land Pattern (Top View)
Pin 9
A
C
A _{1.00 Typ.}
A
BBB
Pin 6
0.50 Typ.
Rev A7 060127
2-663