RFPA2005 Datasheet, PDF (8/9 Pages) RF Micro Devices – Integrated Power Amplifier Module 1805MHz to 2170MHz

RFPA2005
Pin Names and Descriptions
Pin
Name
Description
1
GND
Ground connection
2
RFIN
RF Input; internally matched to 50Ω
3
GND
Ground connection
4
GND
Ground connection
5
VBIAS
Input Bias Voltage; this pin requires a regulated supply to maintain nominal bias current
6
VEN
Enable
7
GND
Ground connection
8
GND
Ground connection
9
RFOUT
RF Output; internally matched to 50Ω
10
GND
Ground connection
11
NC
Not connected
12
VCC2
Output stage collector supply voltage
13
GND
Ground connection
14
NC
Not connected, OPEN Circuit in the Module
15
GND
Ground connection
16
PKG BASE
VCC1
GND
Driver stage collector supply voltage
Ground connection; the back side of the package should be connected to the ground plan though as short of a
connection as possible, PCB vias under the device are recommended.
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS141031
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
8 of 9