RFFM6205 Datasheet, PDF (8/8 Pages) RF Micro Devices – 2.0V to 4.0V, 2.4GHz Front End Module

RFFM6205
Pin Names and Descriptions
Pin
Name
Description
1
C_TX
Control Pin: Transmit Enable/Disable, view logic table for operation
2
N/C
No Internal Connection; Open on PCB
3
GND
No Internal Connection; Ground on PCB
4
RF I/O
RF Input/Output signal: internally matched to 50Ω, DC Blocked
5
GND
No Internal Connection; Ground on PCB
6
VDD_RX
Receive Low Noise Amplifier Voltage Supply
7
GND
No Internal Connection; Ground on PCB
8
N/C
No Internal Connection; No Connect on PCB
9
N/C
No Internal Connection; No Connect on PCB
10
GND
No Internal Connection; Ground on PCB
11
ANT
Antenna Switch Common Port, internally matched to 50 ohms, DC Blocked
12
GND
No Internal Connection; Ground on PCB
13
VDD_TX
Transmit Power Amplifier Voltage Supply
14
C_EN
Control Pin: Enable FEM, view logic table for operation
15
C_BYP
Control Pin: Bypass Enable/Disable, view logic table for operation
16
C_RX
Control Pin: Receive Enable/Disable, view logic table for operation
Pkg Base
GND
Ground connection. The back side of the package should be connected to the ground plane through as short
a connection as possible, e.g., PCB vias under the device are recommended.
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
DS150115
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
8 of 8