RF5601 Datasheet, PDF (8/9 Pages) RF Micro Devices – 4.9GHz to 5.85GHz Low Noise Amplifier with Bypass

RF5601
Pin Names and Descriptions
Pin
Name
Description
1
RF IN
RF Input. Input is matched to 50Ω and DC block is provided internally.
2
LNA_EN
LNA Enable. Please see truth table for operation.
3
BYP_EN
Bypass Enable. Please see truth table for operation.
4
NC
No Connect.
5
RF OUT
RF Output. Output is matched to 50Ω and DC-block is provided internally.
6
NC
No Connect.
7
VDD
Supply voltage for the LNA circuit.
8
NC
No Connect
Pkg Base
The center metal base of the QFN package provides DC and RF ground as well as heat sink for the amplifier.
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [e-mail].
DS131029
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
8 of 9