RFGA2054 Datasheet, PDF (6/8 Pages) RF Micro Devices – InGaP HBT MMIC AMPLIFIER 50MHz TO 3000MHz

RFGA2054
Evaluation Board Assembly Drawing
NOTE: R2 not shown. For saturated operation mount R2 shunt to GND between C6 and Pin 1.
Pin Names and Descriptions
Pin
Name Description
1
RF IN
RF Input. External DC block is required.
2
GND
DC and RF Ground
3
RF OUT/VCC ^{RF Output, Device Collector}
4
GND
DC and RF Ground. Must be soldered to EVB ground plane over a bed of vias for thermal and RF perfor-
mance.
6 of 8
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS111213