RFGA2054 Datasheet, PDF (2/8 Pages) RF Micro Devices – InGaP HBT MMIC AMPLIFIER 50MHz TO 3000MHz

RFGA2054
Absolute Maximum Ratings
Parameter
Rating
Supply Voltage (V_CC)
6.0
Device Current (I_CC)
130
CW Input Power, 50 Output VSWR
15
CW Input Power, 10:1 Output VSWR
10
Operating Junction Temperature (T_J)
Operating Temperature Range (T_L)
Storage Temperature
150
-40 to +85
-55 to +150
ESD Rating - Human Body Model
1C (1000V)
Moisture Sensitivity Level
MSL-2
NOTES: 1. The maximum rating must all be met simultaneously.
2. P_DISS = P_DC + P_RFIN - P_RFOUT.
3. T_J = T_L + P_DISS * R_TH.
Unit
V
mA
dBm
dBm
°C
°C
°C
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
RFMD Green: RoHS compliant per EU Directive 2002/95/EC, halogen free
per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric
materials and red phosphorus as a flame retardant, and <2% antimony in
solder.
Parameter
Specification
Min. Typ. Max.
Linear Operation
Input Power (P_IN)
3.0
Gain
17.3
OIP3
28
P1dB
18.5
Input Return Loss
Output Return Loss
Isolation
Noise Figure
Operating Current (Quiescent)
Operating Voltage (V_CC)
Thermal Resistance (R_TH)
20.3
18.8
18.4
33.5
30.5
29.0
20.3
20.0
19.5
13
13.5
23
3.6
68
5.0
135
20.3
78
5.25
Saturated Operation
Input Power (P_IN)
10
Saturated Output Power
Operating Current
Operating Voltage
20
20.5
20.7
5.0
90
5.25
Unit
dBm
dB
dB
dB
dBm
dBm
dBm
dBm
dBm
dBm
dB
dB
dB
dB
mA
V
°C/W
dBm
dBm
dBm
dBm
mA
V
Condition
Typical performance at 25°C using the standard sample
EVB with R2 = open. This design is for linear operation
only.
Max recommended continuous input power,
V_CC < 5.0V, Load VSWR < 2:1; R2 = open
850MHz
2140MHz
2650MHz
850MHz (0dBm/Tone, 1MHz spacing)
2140MHz (0dBm/Tone, 1MHz spacing)
2650MHz (0dBm/Tone, 1MHz spacing)
850MHz
2140MHz
2650MHz
2140MHz
At V_CC = 5.0V
Max recommended voltage for continuous operation
At quiescent current, no RF, V_CC = 5.0V
Typical performance at 25°C using the input pull-down
resistor (R2 = 5.1 K) to lower quiescent current. See
schematic following the "saturated operation plots".
Max. recommended continuous input power
V_CC < 5.0V, Load VSWR < 2:1, R2 = 5.1 K
850MHz
2140MHz
2650MHz
Max recommended current for continuous operation
Max recommended voltage for continuous operation
2 of 8
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS111213