CGA-1518Z_12 Datasheet, PDF (6/8 Pages) RF Micro Devices – HIGH LINEARITY InGaP HBT AMPLIFIER

CGA-1518Z
Pin
1
2, 3,
6, 7
4
5
8
EPAD
Function
RF IN
GND
Description
RF input pin. External DC-blocking capacitor is required.
Connection to ground. Use via holes for best performance to reduce lead inductance as close to ground leads as
possible.
RF IN
Same as pin 1.
RF OUT/VCC ^{RF output and bias pin (open collector).}
RF OUT/VCC ^{Same as pin 5.}
GND
Exposed area on the bottom side of the package must be soldered to the ground plane of the board for optimum
thermal and RF performance. Several vias should be located under the EPAD as shown in the recommended
land pattern.
S _{Pin Out}
N _{Amplifier Configuration}
SIG ₁
8
DE ₂
7
3
4
NEW
6
5
NOT ^{FOR Part Identification}
6 of 8
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
DS121030